Training Points

 

This section of the Aagard Machine Manual provides a pictorial and written description of each servo reference point on the machine. For each section of the machine, a table lists the servo number, name and values for each servo. Each servo drive is shown pictured in its referenced position with a visible mark or reference indicator for a quick visual check. When the servo drive has been referenced, this mark/indicator should give the operator a quick visual confirmation that the drive has been referenced properly. This is not intended to replace the use of a tape measure, squares, or other means to check reference positions. It is intended to allow operators to quickly check the reference position of a drive without the use of any tools, and continue on with minimal downtime.

 

Machine sections included in this manual:

 

Case Packer