When a changeover adjustment requires parts of the machine to be installed, removed or replaced to fit a different product size, the changepart value may be referred to by size, color or letter. The value is listed between its adjustment number and description on the HMI Changeover Values screen (shown below). The size, color or letter codes correspond to the product sizes the changepart is used to run, and the machine changeparts are marked to match these specifications.

 

For instance:

If the value listed on the Changeover Values screen is "RED", the changepart required will have a red color code painted on it.

If the value listed on the Changeover Values screen is "A", the changepart required will have an "A" marked on it.

If the value listed on the Changeover Values screen is a size, the changepart required will be marked or labeled with the specified size designation.

 

NOTE: A combination of codes may be used. Codes are specific to a machinery system.

 

For more information, see the Changeover Values topic.

 

SAMPLE IMAGE: Changeover Values screen