Case Packer Quick Reference

NOTE: Please refer to the HMI for the current changeover values

NOTE: Please refer to the HMI for the correct changeover sequence

Number	Name
1-1	Load Side Magazine Width
1-2	Load Side Rotate Clip
1-3	Non-Load Side Rotate Clip
1-4	Non-Load Side Clamp & Guide
1-5	Top Clip
1-6	Non-Load Side Upper Clamp
1-7	Load Side Upper Clamp
1-8	Robot Pick Cups
1-9	Robot Case Pusher Horizontal
1-10	Robot Case Pusher Vertical
1-11	Cup Vacuum Control Valve A
1-12	Cup Vacuum Control Valve B
1-13	Cup Vacuum Control Valve C
1-14	Funnel
1-15	Product Stop
1-16	Adjustable Major Flap Lift
1-17	Flap Tucker
1-18	Adjustable Upper Glue Height
1-19	Upper Compression Height
1-20	Upper Compression Width
1-21	Bedplate Width
1-22	Adjustable Lower Glue Height
1-23	Adjustable Minor Containment Rail Height
1-24	Adjustable Compression Plates
1-25	Tip Finger Extension
1-26	Discharge Conveyor Rail Width A
1-27	Discharge Conveyor Rail Width B
1-28	Markem Printer
1-29	Fixed Compression Plates
1-30	Fixed Minor Containment Rail Height
1-31	Fixed Lower Glue Height
1-32	Fixed Upper Glue Height
1-33	Fixed Major Flap Lift
1-34	Funtucker
1-35	Transfer Plate
1-36	Product Conditioner Height
1-37	Loader Plate
1-38	Fixed Downstacker Backstop
1-39	Adjustable Downstacker Backstop
1-40	Stack Height
1-41	Stack Base
1-42	Downstacker Pusher Plate
1-43	Downstacker Width
1-44	Reject Side Belts Width
1-45	Funnel Width

(Print this topic as a reference when setting up new pack patterns!)