Training Points

 

Use this screen to perform less common functions, or functions not associated with any specific equipment module.

 

---

 

Code Reset Button

Tap this button to reset the PLC code.

NOTE: Use with caution!

 

QC Case Button

Tap this button to eject one complete case from the machine for quality control purposes.

 

Clean Out Button

Tap this button to place the machine into a clean out mode to allow for easy removal of product from the machine.

 

 

Ignore Printer Button

Tap this button to allow the Aagard machinery system to run and produce regardless of the status of the printer.

 

Ignore Glue Tank Button

Tap this button to allow the Aagard machinery system to run and produce even if glue system is not running, not ready, shut off, not up to the correct temperature, or faulted out.

 

Hold Upstream Equipment Button

Tap this button to hold upstream equipment, keeping product from entering the Aagard machinery system.

 

Ignore Upstream Equipment Button

Tap this button to keep the Aagard machinery system from suspending due to loss of the upstream equipment running signal.

 

Ignore Downstream Equipment Button

Tap this button to allow the Aagard machinery system to run and produce even when the downstream equipment is not available to receive product.

 

---

 

PV + Config Button

Tap this button to access the PC and configuration settings.

 

Change Password Button

Tap this button to change the password of the current user.

 

Diagnostic Messages Button

Tap this button to view diagnostic messages related to alarms.

 

System I/O Button

Tap this button to open the System Inputs & Outputs screen.

 

Unit Status Button

Tap this button to open the Unit Status screen.