SAMPLE IMAGE
Done
This column contains a Yes/No button for each changeover adjustment. When a changeover routine is in process, the Yes/No button may be selected to show whether or not the changeover adjustment has been completed during the current changeover routine.
Machine
This column lists which machine the changeover adjustment is located in.
Adj. Name
This column lists the name of the changeover adjustment. The name is typically a number that has been assigned to that particular changeover location.
Description
This column contains the description of the item.
Value
This is the value at which the changeover adjustment should be when completed.
The print button will print the machine changeover screen to the default printer set up on the HMI. This printout can then be used during the machine changeover.
It is recommended that when the changeover is completed, the printout be discarded to ensure there are no obsolete copies.
Finish Button
Press this button to continue onto the HMI Main Screen after all of the adjustments have been completed. If any of the adjustments have not been marked completed, a popup will appear after the Finish Button has been pressed. This is a warning to verify that it is OK to continue onto the HMI Main Screen even though all the adjustments haven't been marked as completed.