After power up and initialization of the Packaging system, the Main screen will be displayed. This Main screen is the starting point from which everything branches. All the Message Displays combined will provide information on what is happening with the machine, displaying any faults that would prevent the system from running (guard door open, low air pressure, etc.). The Aagard HMI will go straight to the Main Screen if the HMI is closed and reopened without losing power to any part of the machine.
NOTE: The system will be in the same Mode in which it was left at power down. Correct any Fault conditions which are displayed before attempting to run the machine.
NOTE: Depending on user level, not all buttons will be visible.
|