120 Machine Manual

Changeover Quick Reference Chart

NOTE: Please refer to the HMI for the current changeover values.

NOTE: Please refer to the HMI for the correct changeover sequence.

Number	Name	(future products)
CASE PACKER ADJUSTMENTS
2-1	Operator Side Magazine Width
2-1A	Operator Side Magazine Side Guide
2-2	Non-Operator Side Magazine Width
2-3	Non-Operator Side Magazine Rotate Clip
2-4	Operator Side Magazine Rotate Clip
2-5	Top Clip
2-6	Bedplate Width
2-7	Product Stop - Upper
2-7A	Product Stop Top Plate
2-8	Product Stop - Lower
2-9A	Flap Tucker - Upper
2-9B	Flap Tucker - Lower
2-10	Robot Pick Cups
2-11	Robot Case Pusher Horizontal
2-12	Robot Case Pusher Vertical
2-13	Wide Load Vacuum Control Switch A
2-14	Wide Load Vacuum Control Switch B
2-14A	Operator Side Load Cups On/Off
2-14B	RR Center Load Cups On/Off
2-14C	Operator Side Wide Load Cups On/Off
2-15	Load Deck Transfer Plate Change Parts
2-16	Top Flap Lift
2-17	Product Conditioner Extension
2-18	Funnel
2-19	Upper Compression Height
2-20	Operator Side Upper Glue Height
2-21	Operator Side Tucker Rail Height
2-22	Operator Side Lower Glue Height
2-23	Operator Side Comp. Extension Plates
2-24	Upper Compression Width
2-25	Non-Operator Side Comp. Extension Plates
2-26	Non-Operator Side Upper Glue Height
2-27	Non-Operator Side After Tucker Rail Height
2-28	Non-Operator Side Lower Glue Height
2-29	Product Conditioner Height
2-30	Loader Plate
2-31	Fun-Tucker
2-32	Downstacker Backstop Fixed Side
2-33	Downstacker Backstop Adjustable Side
2-34	Downstacker Width
2-35	Downstack Pusher Change Part
2-36	Infeed Conveyor Rail
2-37	Funnel Width
ORIENTER ADJUSTMENTS
3-1	Robot Tipper Horizontal
3-2	Case Rotate Arm
3-4	Conveyor Side Rail

(Print this topic as a reference when setting up new pack patterns!)