|
|
Slip Sheet Pick Bearing Replacement |
|
|
|
|
|
|
|
Slip Sheet Pick Bearing Replacement |
|
|
|
|
|
Slip Sheet Pick Bearing Replacement
|
|
|
Slip Sheet Pick Bearing Replacement |
|
|
|
|
|
|
|
Slip Sheet Pick Bearing Replacement |
|
|
|
|
|
This topic applies to Unitizers only
Tools Required:
| • | Standard Wrench Set |
| • | Standard Allen Pack |
Routine:
| 1) | Remove the pivot arms that are connected to the shaft |
| 2) | Loosen the set screws on the bearings |
| 3) | Take the bearings off of the mounts and slide off the shaft |
| 4) | Place the new bearings on the ends of the new shaft and put the hardware in the mount but do not tighten |
| 5) | Make sure the shaft is square |
| 6) | Tighten bearings down |
| 7) | Tap on the shaft to set the bearings (make sure the inner race spins freely on the shaft) |
| 8) | Tighten the set screws on bearing |
| 9) | Reattach the pivot arms |
