|
|
Slip Sheet in Place Switch Replacement |
|
|
|
|
|
|
|
Slip Sheet in Place Switch Replacement |
|
|
|
|
|
Slip Sheet in Place Switch Replacement
|
|
|
Slip Sheet in Place Switch Replacement |
|
|
|
|
|
|
|
Slip Sheet in Place Switch Replacement |
|
|
|
|
|
NOTE: This topic applies to Unitizers only
Tools Required:
| • | Flathead Screwdriver Set |
| • | Metric Allen Set |
| • | Standard Allen Set |
Routine:
| 1) | Disconnect wires to the switch |
| 2) | Remove the vertical mount with the five-thirty-second inch Allen wrench |
| 3) | Remove the switch from the mount with the metric Allen wrench |
| 4) | Replace the old switch with the new switch and secure on the mount |
| 5) | Place the mount back on the machine |
| 6) | Reconnect wires to the switch |
| 7) | Adjust the new switch with small flat screw driver so its sees the slip sheet |
