|
|
Side Belt Replacement |
|
|
|
|
|
|
|
Side Belt Replacement |
|
|
|
|
|
Side Belt Replacement
|
|
|
Side Belt Replacement |
|
|
|
|
|
|
|
Side Belt Replacement |
|
|
|
|
|
This topic applies to Case Packers only
Tools Required:
| • | Standard Wrench Set |
| • | Standard Allen Pack |
Routine:
| 1) | Remove product rail below belt |
| 2) | Loosen jack bolt tensioner and loosen pulley mount |
| 3) | Move the pulley so the belt can be removed |
| 4) | Remove plate mount to gain access to the belt |
| 5) | Remove belt |
| 6) | Replace the old belt with the new one (make sure the arrows are in the right direction) |
| 7) | Replace plate mount |
| 8) | Tension the belt with the jack bolt |
| 9) | The average static tension (tension when the belt is idle) is 1/64 inch deflection per every 1 inch of span length with 30 pounds of force for single belt, 60 pounds for double belt |
| 10) | Tighten down pulley mount |
| 11) | Re-install product rail |
