Aagard Machine Manual

Adjust V-Rail Rollers

Hide Navigation Pane

Adjust V-Rail Rollers

 Previous topic Next topic No directory for this topic No expanding text in this topic  

Adjust V-Rail Rollers

 Previous topic Next topic Topic directory requires JavaScript JavaScript is required for expanding text JavaScript is required for the print function  
1)Tighten the adjustable rollers by turning clockwise until wheel just makes contact with track
2)Tighten lock nut fully, and then check roller tension against track

NOTE: Always check after tightening nut because rollers normally will get tighter after nut is tightened

3)When the tension is correct, one should be able to spin the adjustable wheel by hand, or very easily with a channel lock

NOTE: Both wheels need to contact both sides of the track. If both sides of all rollers are not contacting V track and the rollers are considered tight, the assembly is probably not square

 

NOTE: You should always check roller tension in several locations along the track to make sure there are no tight spots