When a hot melt adhesive system is installed, set glue to appropriate temperatures and pressure to ensure proper pattern control and clean cutoff at glue nozzle.
NOTE: The following standard settings are for HB Fuller Advantra adhesive only!
Standard Settings (for HB Fuller Advantra adhesive)
EQUIPMENT |
TEMPERATURE |
PRESSURE |
Tank |
335°F-350°F |
30-40 PSI |
Hose |
335°F-350°F |
N/A |
Guns with adjustable regulators |
335°F-350°F |
65-70 PSI * |
Guns with fixed regulators |
335°F-350°F |
65 PSI |
* Glue nozzle pressure for adjustable regulators is dependent on glue nozzle model installed on machine. If unsure of correct setting for your machine, refer to Nordson documentation or pneumatic page in electrical drawings.