Glue Tanks

 

Hot melt adhesive:  Replenish the hot melt adhesive in the Nordson glue system per Nordson directions as required.  To load glue pellets, lift the cover of the glue tank and gently drop glue pellets into the tank. Fill to fill level line (see picture below).  Close the cover.

 

DANGER

Under no circumstances should you reach into a hot glue tank.

 

Warning: Do not overfill!

 

SAMPLE IMAGE

Please refer to the Nordson ProBlue Adhesive System Manual for information about the hot melt applicator. The Nordson Manual contains everything from electrical wiring diagrams to operation to troubleshooting.