Aagard Machine Manual

Photo Eye Setup: KT8L

Hide Navigation Pane

Photo Eye Setup: KT8L

 Previous topic Next topic No directory for this topic No expanding text in this topic  

Photo Eye Setup: KT8L

 Previous topic Next topic Topic directory requires JavaScript JavaScript is required for expanding text JavaScript is required for the print function  

Aagard Part Number: Z0123715

 

Possible Usage(s):

Case Present At Load

 

 

The Sick KT8L Photo Eye measures contrast difference between a case present and no case present (reflecting off the top flap lift). To ensure the eye will detect various shades of cases, we recommend using light material when doing this procedure. The factory default static 2-point teach-in method is used to set the photo eye. For more information refer to the document sent with the photo eye.

 

To set the photo eye, do the following:

 

1)Place a sheet of white paper on top of the top flap lift to simulate a case present while pressing and releasing the SET button. Wait at least one second.
2)Remove the piece of material so the eye hits the top flap, press and release the SET button again.

 

                 

 

 

The green LEDs indicate the contrast difference. More lights on indicates a higher contrast difference. To ensure good detection reliability, you should have four or more LEDs on when there is no case present.