|
|
Motor and Gearbox Replacement |
|
|
|
|
|
|
|
Motor and Gearbox Replacement |
|
|
|
|
|
Motor and Gearbox Replacement
|
|
|
Motor and Gearbox Replacement |
|
|
|
|
|
|
|
Motor and Gearbox Replacement |
|
|
|
|
|
Tools Required:
| • | Standard Wrench Set |
| • | Standard Allen Pack |
Routine:
| 1) | Shut down the HMI |
| 2) | Disconnect main power |
| 3) | Disconnect the wires to the motor |
| 4) | Loosen the bolts on the bottom of the gearbox and loosen the tensioner to take the belt off of the gearbox pulley |
| 5) | Take the pulley off of the gearbox (save the key) |
| 6) | Remove the motor and gearbox assembly by taking the bolts completely out of the bottom of the gearbox by the mount |
| 7) | Remove the motor from the gearbox (the mount should slide out without force. Save the key) |
| 8) | Put anti-seize on the edge of the new gearbox where the motor surface mounts |
| 9) | Place the new motor and new gearbox together with the same key in the motor shaft (it should slide together without force. You may need to modify the key or get a new one) |
| 10) | Use the existing bolts to secure the motor and gearbox together |
| 11) | Place the assembly back into the machine |
| 12) | Use the same bolts to mount the gearbox to the machine |
| 13) | Re-connect the wires to the motor |
| 14) | Re-connect main power |
| 15) | Restart HMI |
