|
|
Bearing and Shaft Replacement |
|
|
|
|
|
|
|
Bearing and Shaft Replacement |
|
|
|
|
|
Bearing and Shaft Replacement
|
|
|
Bearing and Shaft Replacement |
|
|
|
|
|
|
|
Bearing and Shaft Replacement |
|
|
|
|
|
Tools Required:
| • | Standard Wrench Set |
| • | Standard Allen Pack |
Routine:
| 1) | Remove the drive belt or chain |
| 2) | Loosen the set screws on the bearing |
| 3) | Remove sprocket or pulley off shaft |
| 4) | Take bearings off of mounts and slide off the shaft |
| 5) | Remove the bearing plate |
| 6) | If bearings are pressed in, press out the bearings which need to be replaced |
| 7) | Place the new bearings in the plate |
| 8) | Place the plate back in machine |
| 9) | Place the new bearings on the ends of the shaft and put the hardware in the mount but do not tighten |
| 10) | Make sure shaft is square |
| 11) | Tighten the bearings down |
| 12) | Tap on the shaft to set the bearings (make sure the inner race spins freely on the shaft) |
| 13) | Tighten the set screws on the bearing |
| 14) | Place the drive belt or chains back in |
