Training Points

 

To replenish the magazine while the machine is running, stack the case blanks behind the follower plate and then pivot the follower plate out from the stack.  Move the follower plate to the end of the stack and push against the stack, removing any gaps that may be present before resetting the follower plate onto the chain. Make sure that the blanks are pushed up tightly against the magazine backstop.

 

 

Note: On knockdown style cases, the glued manufacturer's flap should be facing upstream (toward the follower plate). When the side clips are adjusted correctly and the case is correctly loaded, the clips should align with the case score line cutout (see picture below).